| 地址： | 河北省泊頭市道東街88号 |
| 電話： | 0317-8185077 |
| 0317-8263980 | |
| 0317-8223128 | |
| 傳真： | 0317-8265584 |
| E-mail： | hbydby@126.com |
| 螺杆泵的裝配流程 Screw pump assembly process |
| 發布時間：2014-11-20 8:36:49 點擊次數： |
①螺杆泵裝配前用煤油或者汽油清洗全部零件，去掉氧化皮和型砂。(1) with kerosene or gasoline cleaning all parts before assembly, remove scale and sand. ②将軸承裝在主動螺杆上，并用圓螺母鎖緊。(2) the bearing is installed on the active screw, with a round nut lock. ③将卸壓套裝在軸承體内，再穿入主動螺杆。  (3) the unloading suits in the bearing, and then through the active screw. ④将泵套裝入泵體中。(4) the pump set into the pump body. ⑤将軸承體、卸壓套、主動、從動螺杆一起裝入泵套與泵體中。 (5) the bearing body, unloading, driving and driven screw together into the pump set and pump body. ⑥将主動襯套、從杆襯套、止推墊裝入泵套與主、從螺杆上。 6 will take the initiative to bushing, from stem bushing, thrust pad loading pump sets with the Lord, from the screw. ⑦将後蓋裝入泵體上。All landowners will back cover load on the pump body. ⑧從主杆螺杆伸出端依次裝入機械密封、密封壓蓋。Was out from the main pole screw end into the mechanical seal, seal gland in turn. ⑨将安全閥組裝在泵體上部。The relief valve assembly pet-name ruby to the pump body upper part. 安全閥的裝配:The relief valve assembly: ①将閥座裝入泵體内，并用螺釘固定。(1) the seat into the pump body and screw fixation. ②将調節杆旋入閥後蓋。(2) to regulate stem screwing in the back cover. ③依次講閥瓣、彈簧、彈簧座裝入閥體，再将閥後蓋與閥體連接好，裝螺母防護帽。(3) speak in turn into the valve body, disc, spring, spring seat and the back cover and body connection is good, protective cap nut. ④裝螺杆泵閥前端蓋。Before the valve cover |